MODEL 7500 SIDE CAST-GRADING MACHINE
|
GENERAL |
Length: 26" - 0 |
|
Width: 12' - 0 |
|
|
Height: 9" - 0 |
|
|
Weight: 26,750 lbs Approx. |
|
|
ENGINE / FUEL |
95 HP John Deere Turbo Diesel |
|
30 Gallon Fuel Tank |
|
|
TRACTION DRIVE |
Front wheel drive and steering |
|
Rear wheel steering |
|
|
4 wheel brakes |
|
|
Variable speed drive 0-182 FPM @ 1500 RPM Engine Speed |
|
|
Wheel drive disconnect for towing |
|
|
Hopper |
Width: 9' - 1/2" inside |
|
Dual 48-wide conveyor belts side by side (Heat and Oil resistant belt) |
|
|
Planetary Gearbox variable speed belt drive |
|
|
0-45 FPM @ 1500 RPM Engine speed (200 Ton/Hr based on 12 yard end |
|
|
dump 5 minute cycle time, 600 Ton/Hr continuously feeding material to hopper) |
|
|
Sides and wear points lined with U.H.M.W. |
|
|
Push rollers, extendable 12" |
|
|
Hopper height 33 1/2" |
|
|
CROSS CONVEYOR |
Width 20-with 18" exposed 11'-0-long |
|
Planetary gearbox variable speed belt drive (Heat and Oil resistant belt) |
|
|
0-460 FPM @ 1500 RPM Engine speed |
|
|
Reversible discharge into telescoping boom on left or grading on right |
|
|
Side lined with U.H.M.W. material |
|
|
TELESCOPING BOOM |
Width 24" with 22" exposed 6'-0" to 9'-0" long |
|
Discharge height 8" - 39" retracted, 6" - 45" extended |
|
|
Boom reach from edge of hopper 5'-6" - 8'-6" |
|
|
Hydraulic motor variable speed belt drive (Heat and Oil resistant belt) |
|
|
0-690 FPM @ 1500 RPM Engine speed Sides lined with U.H.M.W. material |
|
|
Discharge deflector gate for precise product placement (hydraulically adjustable) |
|
|
Boom Folds to rear of machine for transport |
|
|
SIDE GRADING TOOL |
Height adjustable from grade to 12" above grade |
|
Extendable from wheels 10"-22" |
|
|
Pitch adjustment from 11" above and 11" below, horizontal at 3'-0 |
|
|
Spreading width 1'-0" to 13'-0" |
|
|
Grading tool folds to side of machine for transport |
|
Copyright © 1998 | Home | About Us | Contact Us | Our Products | |