File = 'C:\Documents and Settings\Gina\My Documents\Website\Websitesept9\lm420spec.htm'

BID SPECIFICATIONS

YES

NO

Front Hopper

10'-16' Expandable Hopper System Available; Fixed Hopper Systems Available.

CARS Computer System

Only necessary on LM-420 chip spreader with an Expandable Hopper. Fixed Hopper System is controlled manually or optional rate control.

Rear Receiving Hopper

4 Cubic Yards holding capacity

Hitch

Hitch permits hooking and unhooking of trucks without stopping. Controlled from operators station. Hydraulically activated. 6" - 20" Height; 10" Fore & Aft

Chassis

Unit welded 3" X 6" structural tubing for lower members, welded 3/8" rear and front axle holder, with front pyramid and nine cross bracings in each conveyor side, welded into one sturdy unit.

Power Train

Power-Shift Transmission, 6 speeds forward, 3 speeds reverse

Engine

Caterpillar 3126B 225HP@2400 RPM

Steering

Hydraulic control power steering, orbital type with closed center steering valve. Right hand and left hand steering wheels.

Rear Axle - Rear Wheel Drive

Differential, 35,000 lbs. capacity. Planetary wheel ends 19:1 ratio, Air spring brakes 16 1/2 x 7, 12 bolt wheel.

Rear Axle - Non Drive

35,000 lbs. capacity. Tag 16 1/2 x 7 Air spring brakes, 10 bolt wheels.

Front Axle - Drive

26,000 lbs. capacity. Planetary wheel ends 19:1 ratio, 17 X 4 Air over hydraulic brakes, 12 bolt wheels

Front Axle - Non Drive

16,000 lbs. capacity, 10 bolt wheels, 15" x 4" Air brakes

Tires and Wheels

Compactor: 11X20 Smooth Compactor Tires, Rims: 11X20; Highway: 385/65R 22.5 Highway Tread, Rims: 12X22.5

Brakes

Refer to Axle Specs

Hydraulic System

Variable displacement pumps: the hydrostatic drive system consists of 3 variable displacement axial piston pumps connected in an open circuit. Conveyor system connected to a fixed displacement, low speed high torque motor. The variable displacement pumps are controlled by an external motorized flow control and are infinitely variable between 0 and maximum speed. Oversized oil cooler, 54 gallon capacity reservoir.

Operators Station

One driver seat on left hand side of machine. Dual station is optional.

Instruments

Voltmeter Tachometer, Hydraulic Temp., Water Temp., Engine Oil Temp., Fuel Gauge.

Conveyors

2 - 20" heavy-duty 4 ply conveyor belts automatically engaged by a proximity switch or manually engaged.

Paint

GEFFS standard Highway Safety Yellow or customers choice.

Options:

Single umbrella shade. Vibrators mounted on front hopper to shake up wet or sandy material. Dual Station.

Side Delivery System:

Side delivery system with 24" conveyors. Strike-off blade mounts on same side as side delivery system.

Warranty

GEFFS standard 12 month warranty on all parts and service.

Weight

19,000 LBS.

Dimensions

24' 2"Long; 9' 8"High;Width depends upon hopper

Hopper Transport Dimensions

Expandable Hopper : 10'-16' Hopper - 10'8" Wide; 12'-20' Hopper - 12'8" Wide

Fixed Hopper: Fixed hopper add 6" to hopper width.

	BID SPECIFICATIONS	YES	NO
Front Hopper	10'-16' Expandable Hopper System Available; Fixed Hopper Systems Available.
CARS Computer System	Only necessary on LM-420 chip spreader with an Expandable Hopper. Fixed Hopper System is controlled manually or optional rate control.
Rear Receiving Hopper	4 Cubic Yards holding capacity
Hitch	Hitch permits hooking and unhooking of trucks without stopping. Controlled from operators station. Hydraulically activated. 6" - 20" Height; 10" Fore & Aft
Chassis	Unit welded 3" X 6" structural tubing for lower members, welded 3/8" rear and front axle holder, with front pyramid and nine cross bracings in each conveyor side, welded into one sturdy unit.
Power Train	Power-Shift Transmission, 6 speeds forward, 3 speeds reverse
Engine	Caterpillar 3126B 225HP@2400 RPM
Steering	Hydraulic control power steering, orbital type with closed center steering valve. Right hand and left hand steering wheels.
Rear Axle - Rear Wheel Drive	Differential, 35,000 lbs. capacity. Planetary wheel ends 19:1 ratio, Air spring brakes 16 1/2 x 7, 12 bolt wheel.
Rear Axle - Non Drive	35,000 lbs. capacity. Tag 16 1/2 x 7 Air spring brakes, 10 bolt wheels.
Front Axle - Drive	26,000 lbs. capacity. Planetary wheel ends 19:1 ratio, 17 X 4 Air over hydraulic brakes, 12 bolt wheels
Front Axle - Non Drive	16,000 lbs. capacity, 10 bolt wheels, 15" x 4" Air brakes
Tires and Wheels	Compactor: 11X20 Smooth Compactor Tires, Rims: 11X20; Highway: 385/65R 22.5 Highway Tread, Rims: 12X22.5
Brakes	Refer to Axle Specs
Hydraulic System	Variable displacement pumps: the hydrostatic drive system consists of 3 variable displacement axial piston pumps connected in an open circuit. Conveyor system connected to a fixed displacement, low speed high torque motor. The variable displacement pumps are controlled by an external motorized flow control and are infinitely variable between 0 and maximum speed. Oversized oil cooler, 54 gallon capacity reservoir.
Operators Station	One driver seat on left hand side of machine. Dual station is optional.
Instruments	Voltmeter Tachometer, Hydraulic Temp., Water Temp., Engine Oil Temp., Fuel Gauge.
Conveyors	2 - 20" heavy-duty 4 ply conveyor belts automatically engaged by a proximity switch or manually engaged.
Paint	GEFFS standard Highway Safety Yellow or customers choice.
Options:	Single umbrella shade. Vibrators mounted on front hopper to shake up wet or sandy material. Dual Station.
Side Delivery System:	Side delivery system with 24" conveyors. Strike-off blade mounts on same side as side delivery system.
Warranty	GEFFS standard 12 month warranty on all parts and service.
Weight	19,000 LBS.
Dimensions	24' 2"Long; 9' 8"High;Width depends upon hopper
Hopper Transport Dimensions	Expandable Hopper : 10'-16' Hopper - 10'8" Wide; 12'-20' Hopper - 12'8" Wide
Hopper Transport Dimensions	Fixed Hopper: Fixed hopper add 6" to hopper width.